603463

Standard Horizon MATRIX AIS GX2000 Manual

111
Zoom out
Zoom in
Previous page
1/136
Next page
Page 111GX2000/GX2100
16.5 SAVING A DSC POSITION CALL AS A WAYPOINT
When a position is received from a another DSC radio the GX2000/GX2100
allows the position to be saved as a waypoint.
1. After a position has been received, press the
[
SAVE
]
soft key two times.
2. The first digit in the WPT Name will be flash-
ing, rotate the CHANNEL knob to the first let-
ter of the name you want to input.
3. Press the
[
ENT
]
soft key, then rotate the CHANNEL
knob to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the
[
ENT
]
soft key until the radio
beeps to save the waypoint to memory.
6. Press the
[
QUIT
]
soft key several times to return to radio operation.
16.6 NAVIGATING TO A SAVED WAYPOINT
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “Setup Menu” appears.
2. Rotate the CHANNEL knob to select “GEN-
ERAL SETUP”.
3. Press the
[
SELECT
]
soft key, then select “DIS-
PLAY” with the CHANNEL knob.
4. Press the
[
ENT
]
soft key, and select
“WAYPOINT”, and press the
[
SELECT
]
soft
key.
5. Select the waypoint name and press the
[
ENT
]
soft key to show the waypoint data display.
6. Press the
[
ENT
]
soft key to start navigating
the waypoint and show the Waypoint Nav display.
NOTE
The radio must be connected to a GPS to be able to navigate to a
waypoint.
… 111 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2000 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info