603463

Standard Horizon MATRIX AIS GX2000 Manual

23
Zoom out
Zoom in
Previous page
1/136
Next page
Page 23GX2000/GX2100
OFFSET TIME TABLE
8.5 CHECKING GPS CONNECTIONS
After connections have been made between the
GX2000/GX2100 and the GPS, a small satellite icon
will appear on the top right corner of the display and
your current location (Latitude/Longitude) is shown on
the display.
NOTE
If there is a problem with the NMEA connection between the radio and
the GPS, the GPS icon will blink continuously until the connection is
corrected.
8.6 CHANGING THE GPS TIME
From the Factory the GX2000/GX2100 shows GPS satellite time or UTC time
when an optional GPS is connected. A time offset is needed to show the local
time in your area. The Time Offset must be changed in order for the radio to
display the current time in your area. Please see the Offset Time Table at the
bottom of this page.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “Setup Menu” appears, then select “GEN-
ERAL SETUP” with the CHANNEL knob.
2. Press the
[
SELECT
]
soft key, then select
“TIME OFFSET” with the CHANNEL knob.
3. Press the
[
SELECT
]
soft key, then rotate the CHAN-
NEL knob to select time offset of your location. See
illustration below to find your offset time. If “00:00”
is assigned, the time is the same as UTC (Universal
Time Coordinated or GPS Satellite Time).
4. Press the
[
ENT
]
soft key to store the time offset.
5. Press the
[
QUIT
]
soft key several times to return to radio operation.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon MATRIX AIS GX2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon MATRIX AIS GX2000 in the language / languages: English as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info