603489
32
Zoom out
Zoom in
Previous page
1/140
Next page
Page 32 HX870
8.9.4 Priority Scanning (P-SCAN)
1. Set the scan type to “PRIORITY” in the SETUP menu (refer to “8.9.1 Select-
ing the Scan Type”).
2. Press the SQL key, then press the CH▼/CH▲ key until background noise
disappears.
3. Press the / key repeatedly, then press the [SCAN]
soft key. “PRI SCAN” appears on the display. Scanning
will proceed between the memorized channels and preset
channel (described in next section) and the priority channel.
The priority channel will be scanned after each programmed
channel.
P
16
VOL
118°
09.582
33°
37.120
W
s
LOC 09.56 AM
BUSY HI
USA
TIME
LON
LAT
MEM
P-SET
PRI
SCAN
4. To stop scanning, press the 16/S or CLR key.
NOTE
In the default setting, Channel 16 is set as the priority channel. You
may change the priority channel to the desired channel from Channel
16 on the SETUP menu. Refer to section “14.7 PRIORITY CHANNEL”.
8.10 PRESET CHANNELS: INSTANT ACCESS
10 preset channels can be programmed for instant access. Press the /
key repeatedly, then press the [PRESET] soft key. Pressing the [PRESET]
key activates the user assigned channel bank. If the [PRESET] soft key is
pressed and no channels have been assigned, an alert beep will be emitted
from the speaker.
Before beginning the Instant Access operation, assign the “PRESET” command
into one of the programmable keys, refer to section “12.7 SOFT KEYS”.
8.10.1 Programming
1. Press the CH▼/CH▲ key to select the chan-
nel to be programmed.
A
22
USCG
VOL
118°
09.582
33°
37.120
W
s
LOC 09.56 AM
BUSY HI
USA
TIME
LON
LAT
C
A
MEM
P-SET
A
22
USCG
VOL
118°
09.582
33°
37.120
W
s
LOC 09.56 AM
BUSY HI
USA
TIME
LON
LAT
C
A
MEM
P-SET
QUIT ADD
A
22
USCG
VOL
118°
09.582
33°
37.120
W
s
LOC 09.56 AM
BUSY HI
USA
TIME
LON
LAT
C
A
MEM
P-SET
2. Press the / key repeatedly to indicate
the function on the display, then press and
hold the [PRESET] soft key until the “P-SET
icon and channel number are blinking.
3. Press the [ADD] soft key to program the
channel into the preset channel memory.
[P-SET]” icon will appear.
32


Need help? Post your question in this forum.

Forumrules
1

Forum

standard-horizon-hx870

Reset search

  • When I input a waypoint into my standard horizon HX870, it does not let me finish and go back to the save menu. Does anybody know why? Thanks in advance. Submitted on 10-9-2022 at 19:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX870 in the language / languages: English as an attachment in your email.

The manual is 25,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Standard Horizon HX870

Standard Horizon HX870 Quick start guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info