603515

Standard Horizon HX851E Manual

42
Zoom out
Zoom in
Previous page
1/92
Next page
HX851EPage 42
the right, press the
[
CALL
(
ENT
)
MENU
]
key. Repeat
this procedure until all nine spaces of the MMSI num-
ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI number
repeatedly press the
[
H/L
( )]
key until the wrong num-
ber is selected, then press the
[
]
/
[
]
key to correct
the entry.
7. When finished entering the MMSI number, press and
hold the
[
CALL
(
ENT
)
MENU
]
key. The transceiver will
beep, and the “Select Intership CH” menu will appear
8. Press the
[
]
/
[
]
key to select “Manual”, then press
the
[
CALL
(
ENT
)
MENU
]
key.
9. Press the
[
]
/
[
]
key to select the operating channel
you want to communicate on and press the
[
CALL
(
ENT
)
MENU
]
key.
10. Press the
[
CALL
(
ENT
)
MENU
]
key again to
transmit the Individual DSC signal.
11. When an Individual Call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on step
5 above and a ringing tone sounds.
12. Press the
[
CLR
]
key to listen to the channel to
make sure it is not busy, then key the micro-
phone and call the other vessel you desire to commu-
nicate with.
7.5.5 RECEIVING AN INDIVIDUAL CALL
When receiving an Individual Call, an acknowledgment transmission is sent
back to the calling station to switch to a communication channel. The HX851E
default setting is Automatic, but has a manual menu selection that allows you
to see the vessel calling before sending an reply. This selection is useful if you
want to see who is calling and requesting you to switch to a channel for com-
munications, similar to caller id on a cellular phone.
1. When an Individual Call is received, an Individual Call ringing alarm sounds.
The radio automatically (automatic mode selected)
switches to the requested channel. The display shows
the MMSI of the vessel calling.
2. Press any key to stop the alarm.
3. Press the PTT switch and talk to the calling ship.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX851E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX851E in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info