Manual Standard Horizon HX500E (page 19 of 36) (English)

603514

Zoom out

Zoom in

1/36

HX500E Page 17

6.7 CHANNEL 9

Channel 9 is used as a hailing channel for initial, non-emergency contacts

with other vessels. Hold down the [16/9] key for 1 second to select channel

9. You should change to a working channel, after contact is established (so

as to keep the hailing channel clear for other users).

6.8 OPERATING ON CHANNEL 13

Channel 13 is used at docks, bridges and for maneuvering in port. Mes-

sages on this channel must concern navigation only, such as meeting and

passing in restricted waters. In emergencies and when approaching blind

river bends, high power is allowed. Pressing the [H/L] key will change the

power output from 1 Watt (

) to 5 Watts ( ); if pressed again, 2.5 Watts

(

) will be selected. When the PTT switch is released, the transceiver will

revert to Low power. Press the [H/L] key again if you need High power on a

subsequent transmission.

6.9 OPERATING ON CHANNEL 67

When channel 67 is used for navigational bridge-to-bridge traffic between

ships. This channel has been allocated for temporary high power transmis-

sion if communication is not able to be established on one watt.

Select Channel 67, then press the [H/L] key to set the transmitter output to

either High or Medium power. When the PTT switch is released, the trans-

ceiver will revert to low power.

6.10 SIMPLEX/DUPLEX CHANNEL USE

All Marine channels are factory-programmed in accordance with FCC (USA),

Industry Canada and International regulations. The mode of operation can-

not be altered from simplex to duplex or vice-versa. Simplex (ship to ship) or

duplex (marine operator) mode is automatically activated, depending on the

channel and whether the USA, International or Canadian operating band is

selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX500E in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon HX500E Manual

Product: