603477
30
Zoom out
Zoom in
Previous page
1/48
Next page
HX400ISPage 30
CH NAME
Function: Changes the channel name shown on the dis-
play.
To change the channel name:
1. Select the channel you wish to change the name be-
fore following the steps below.
2. Turn off the HX400IS by rotating the VOL knob counter clockwise.
3. Hold down the key, then turn on the transceiver while still holding down
the key.
4. Press the or key to select “CH NAME”.
5. Press the key. The current channel name will appear on the upper left
corner of the display.
6. Press the or key to select the first character (letter, number, or sym-
bol) in the name, then press the key to move to the next character.
7. Repeat step 6 as many times as necessary to complete the name tag (up
to 12 characters).
8. After completing your adjustment, press the key to save the new set-
ting.
9. Press the key to exit to normal operation.
MEM CH
Function: Programming Scan Memory.
See page 24 for details of the programming.
SCRAMBLER
Function: Enables/Disables the Voice Scrambler and se-
lects its scramble code.
Available Values: oFF / SC0 / SC1 / SC2 / SC3
Default: oFF
NOISE CANCEL
Function: Enables/Disables the Noise Canceling Micro-
phone.
Available Values: on / oFF
Default: on
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX400IS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX400IS in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info