603477

Standard Horizon HX400IS Manual

24
Zoom out
Zoom in
Previous page
1/48
Next page
HX400ISPage 24
6.8 MEMORY SCAN
The HX400IS will automatically scan channels programmed into Preset Chan-
nel Memory and also channels store into Scan Memory.
When an incoming signal is detected on one of the channels during scan, the
radio will pause on that channel, allowing you to listen to the incoming trans-
mission. The radio will automatically start scanning again after the transmis-
sion stops.
6.8.1 PROGRAMMING SCAN MEMORY
1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise.
2. Hold down the key, and then turn on the transceiver while still holding
down the key.
3. Press the or key to select “MEM CH” and press
the key.
4. Press the or key to select desired channel to be
scanned, then press the key. The “ ” icon ap-
pears on the display, which indicates the channel has
been selected to the scan channel.
5. Repeat step 4 for all the desired channels to be pro-
grammed into scan memory.
6. To DELETE a channel from the list, select the channel
then press the
key. The “ ” icon disappears from
the display.
7. When you have completed programming the scan
memory, press the key to save your changes, and
then press the key to exit to normal operation.
6.8.2 OPERATION
1. Press the key to activate the squelch adjusting mode, then press the
/ key until the background noise disappears.
2. Press the key to start scanning channels pro-
grammed into memory and preset channels. “MSCAN”
will be shown in the upper left corner of the display.
3. When the HX400IS receives a transmission, it will stop
on the channel until the incoming signal disappears,
then start scanning again.
4. To stop scanning, press the key.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX400IS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX400IS in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info