Manual Standard Horizon HX400IS (page 20 of 48) (English)

603477

Zoom out

Zoom in

1/48

HX400ISPage 20

6. BASIC OPERATION

6.1 INITIAL SETUP

1. Install the battery pack on the transceiver (see section “4.3.2 BATTERY

INSTALLATION AND REMOVAL”).

2. Install the antenna onto the transceiver; hold the bottom end of the an-

tenna, then screw it onto the mating connector on the transceiver until it is

snug. Do not over-tighten.

6.2 RECEPTION

1. Turn the VOL knob clockwise to turn the trans-

ceiver on.

The battery voltage will appear briefly at the upper

left corner on the display, then the channel name

will appear.

2. Press the key to activate the squelch adjusting

mode (The “SQL LVL” notation will appear). Press the

key until the “ ” indicator appears on the dis-

play, then press the key again.

3. Turn the VOL knob clockwise until the noise or audio

from the speaker is at a comfortable level.

4. Press the key, then press the key until the ran-

dom noise disappears. This state is known as the

“Squelch Threshold”.

5. Press the or key to select the desired channel.

Refer to the channel chart on page 37 for available chan-

nels.

6. When a signal is received, adjust the VOL knob to the

desired listening level. The “ ” indicator on the

LCD is displayed indicating that the channel is being

used.

6.3 TRANSMISSION

1. Perform “6.2 RECEPTION” discussion above.

2. Before transmitting, monitor the channel and make sure it is clear.

THIS IS AN FCC REQUIREMENT!

3. For communications over short distances, press the

key to select Low power (1 watt: “ ” icon appears).

Note: Transmitting on Low power prolongs battery life.

Low power should be selected whenever possible.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX400IS in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon HX400IS Manual

Product: