603506

Standard Horizon HX280E Manual

18
Zoom out
Zoom in
Previous page
1/32
Next page
HX280EPage 18
6.9 SCANNING
The HX280E allows the user to select the scan type from “Memory Scan” or
“Priority Scan”. “Memory Scan” scans the channels that were programmed
into memory. “Priority Scan” scans the channels that were programmed into
memory with the priority channel (Channel 16). When an incoming signal is
detected on one of the channels during scan, the radio will pause on that
channel, allowing you to listen to the incoming transmission.
6.9.1 SELECTING THE SCAN TYPE
1. Turn the transceiver off by rotating the VOL knob fully counter-clockwise.
2. Hold down the
[
SQL
]
key, and then turn on the transceiver while still hold-
ing down the
[
SQL
]
key.
3. “SEt” will appear on the display, indicating the Menu
(“Set”) Mode has been activated.
4. Press the
[
SQL
]
key, repeatedly if necessary to
select the Menu item “SC”.
5. Press the
[
]
or
[
]
key to select “PS (Priority Scan)” or
“MS (Memory Scan)”. The factory default is “PS
(Priority Scan)”.
6. After completing your selection, turn the trans-
ceiver off and on by rotating the VOL knob.
6.9.2 MEMORY SCANNING
(
M-SCAN
)
1. Select the desired channel to be included in the scan memory using the
[
]
or
[
]
key.
2. Press the
[
MEM
]
key to store the channel into the
transceiver’s scan memory. “MEM” will be displayed on
the LCD.
3. Repeat steps 1 and 2 for all the channels to be scanned.
4. To delete a channel from the transceiver’s scan memory, select the memo-
rized channel, then press the
[
MEM
]
key to delete the channel from scan
memory.
5. All channels programmed remain in the transceiver’s scan memory even if
the power is turned off.
6. Adjust the SQL level until background noise is eliminated by pressing the
[
SQL
]
key followed by the
[
]
/
[
]
key.
7. To start scanning, press the
[
SCAN
]
key. The scan pro-
ceeds from the lowest to the highest programmed chan-
nel and stops scanning when a transmission is received.
Scanning will resume when the incoming signal disap-
pears at the end of the transmission. The “MEM” and “SCN” icon will ap-
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX280E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX280E in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info