603485

Standard Horizon HX100 Manual

27
Zoom out
Zoom in
Previous page
1/48
Next page
Page 27HX100/HX150
6.9 SCANNING
The HX100/HX150 allows the user to select the scan type from “Memory
Scan” or “Priority Scan”. “Memory Scan” scans the channels that were pro-
grammed into Scan Memory and also channels stored in the Preset Channel
(“
P0
” ~ “
P9
”). “Priority Scan” is similar to the “Memory Scan” scan, however
it scans the priority channel (channel 16) and dual watches to channels pro-
grammed in memory scan and preset channel memory. When an incoming
signal is detected on one of the channels during scan, the radio will pause on
that channel, allowing you to listen to the incoming transmission.
6.9.1 PROGRAMMING SCAN MEMORY
1. Turn the transceiver off by pressing and holding the
key.
2. Press and hold the key, and then turn on the trans-
ceiver while still holding down the key. “SET” icon
will appear on top right of the display.
3. Press the
or key to select desired channel to
be scanned, then press the
key. The “M” icon ap-
pears on the display, which indicates the channel has
been selected to the scan channel.
4. Repeat step 3 for all desired channels to be programmed into scan mem-
ory.
5. To DELETE a channel from the scan memory, select the channel by
pressing the or key, then press the key. The “M” icon will
disappear from the display.
6. When you have completed programming scan memory, turn the trans-
ceiver off and on by press and holding the key.
6.9.2 SELECTING SCAN TYPE
1. Turn the transceiver off by press and holding the
key.
2. Press and hold the
key, and then turn on the transceiver while still
holding down the
key.
3. “SET” icon will appear on the display, indicating the
Menu (“Set”) Mode has been activated.
4. Press the
key until “
SC
” is shown in the bottom right
of the display.
5. Press the or key to select “
PS
(Priority Scan)”
or “
MS
(Memory Scan)”. The factory default is “
PS
(Pri-
ority Scan)”.
Priority Scan: Scans the Scan Memory Channel, Pre-
set Channel, and the Priority Channel
(Channel 16).
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX100 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info