Manual Standard Horizon HX100 (page 10 of 48) (English)

603485

Zoom out

Zoom in

1/48

HX100/HX150Page 10

After a transmission, say “over”, and release the PTT (Push-To-Talk) switch.

When all communication with the other vessel is completed, end the last

transmission by stating your Call Sign and the word “out”. Note that it is not

necessary to state your Call Sign with each transmission, only at the begin-

ning and end of the contact.

Remember to return to Channel 16 when not using another channel. Some

radios automatically monitor Channel 16 even when set to other channels or

when scanning.

3.5 OPERATING ON CHANNEL 13

Channel 13 is used at docks, bridges and for maneuvering in port. Messages

on this channel must concern navigation only, such as meeting and passing

in restricted waters. In emergencies and when approaching blind river bends,

High power is allowed. Pressing the

key will change the power output

from Low Power (1 Watt) to High (5 Watts: HX150, 2.5 Watts: HX100). When

you change from this channel then return to it, low power will be automati-

cally selected.

3.6 OPERATING ON CHANNEL 67

When channel 67 is used for navigational bridge-to-bridge trafc between

ships, High power may be used temporarily (in the USA band) by pressing

the

key. When you select this channel again, the transceiver will revert

to low power.

3.7 SIMPLEX/DUPLEX CHANNEL USE

Refer to the section “9. VHF MARINE CHANNEL CHART ASSIGNMENT”

for instructions on use of simplex and duplex channels.

NOTE

All channels are factory-programmed in accordance with FCC (USA),

Industry Canada and International regulations. The mode of opera-

tion cannot be altered from simplex to duplex or vice-versa. Simplex

(ship to ship) or duplex (marine operator) mode is automatically acti-

vated, depending on the channel and whether the USA, International

or Canadian operating band is selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX100 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon HX100 Manual

Product: