661377
43
Zoom out
Zoom in
Previous page
1/140
Next page
Page 43HX870
On the display you will notice 3 soft key selections. These
selections are described below:
[ACCEPT]: Press this key to accept the DSC distress call
and to switch to Channel 16.
Note: If a key is not pressed for 15 seconds or longer the
radio will automatically select Channel 16. (Timer setting
time is set in “CH SWITCH TIME” from “DSC SETUP”. The
default setting is 15 sec.)
ACCEPT QUITPAUSE
RX DISTRESS
Yaesu
24°
25.975N
118°
59.456
366901235
E
UTC
POS TM:
POS:
12:56
SINCE:
00:05
NOT ACKNOELESGED
NATURE:UNDESIGNATED
[PAUSE]: Press this key to temporarily disable automatic switching to
Channel 16.
[QUIT]: Press this key to quit the automatic Channel 16 switching and revert
to the last selected working channel.
4. After accepting the call, press the [TO WPT] soft key to set
the vessel in distress as a destination for navigation.
Note: You may change the waypoint name.
BACK QUITTO WPT
RX DISTRESS ACK
DIST:366901235
DIST INFO
Horizon
DST:
10:00
NATURE:UNDESIGNEATED
24°
25.975N
118°
59.456E
UTC
NM
POS TM:
POS:
12:56
NAME:
001WPT
---------
POSITION:
SELECT
WAYPOINT
SAVE
SAVE & GOTO
BACK
34°
25.975S
118°
59.456W
SOGkph
36.0
DSTkm
35.2
BRG T
WPT 001WPT
HIUSA
WPT
N-UP 20nm
BUSY
300
16
°
DW-16
5. Press the CH▼/CH▲ key to select “SAVE & GO”, then
press the [SELECT] soft key to replace the display to the
waypoint screen. The display indicates the distance and
direction of the distressed vessel, and also the compass
indicates the distressed vessel by dot ().
6. To stop navigating to a waypoint, press one of the soft keys,
then press the [STOP] soft key. The radio is switched to
the normal mode.
NOTE
You must continue monitoring Channel 16 as a coast station may
require assistance in the rescue attempt.
When there is an unread distress alert, “ ” icon will appear on the
display. You may review the unread distress alert from the DSC log,
refer to the section “10.13.2 Reviewing a Logged DSC Distress Call”.
Not all DSC radios can receive a DSC distress relay call.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX 870E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX 870E in the language / languages: English as an attachment in your email.

The manual is 25,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Standard Horizon HX 870E

Standard Horizon HX 870E Quick start guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info