661376
24
Zoom out
Zoom in
Previous page
1/44
Next page
HX290Page 24
6.9.2 PROGRAMMING SCAN MEMORY
1. Turn the transceiver off by rotating the VOL knob fully
counter-clockwise.
2. Hold down the key, and then turn on the transceiver
while still holding down the key.
3. SEt ” will appear on the display, indicating the Menu
(“Set”) Mode has been activated.
4. Press the key, repeatedly if necessary to select the
Menu item “SCn”.
5. Press the or key to select desired channel to be
scanned, then press the key. The “SCN” icon ap-
pears on the display, which indicates the channel has
been selected to the scan channel.
6. Repeat step 5 for all the desired channels to be pro-
grammed into scan memory.
7. To DELETE a channel from the list, select the channel
then press the
key. The “SCN” icon disappears from
the display.
8. When you have completed programming the scan memory, turn the trans-
ceiver off and on by rotating the VOL knob.
6.9.3 MEMORY SCANNING
(
M-SCAN
)
1. Adjust the SQL level until background noise is eliminated by pressing the
key followed by the or key.
2. Press the key to start scanning channels pro-
grammed into scan memory and preset channels.
The “SCN” icon will appear at the left of the channel num-
ber on the display during scanning.
3. When the HX290 receives a transmission, it will stop on the channel until
signal disappears, then start scanning again.
4. To stop the scan, press the key briefly.
6.9.4 PRIORITY SCANNING
(
P-SCAN
)
1. Adjust the SQL level until background noise is eliminated by pressing the
key followed by the or key.
2. To start scanning, press the key. The scan proceeds from the lowest to
the highest programmed channel and the Priority Chan-
nel (Channel 16). The “PRI” and “SCN” icons will appear
at the left of the channel number on the display during
scanning.
3. When the HX290 receives a transmission on a working channel, it will stop
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX 290E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX 290E in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Standard Horizon HX 290E

Standard Horizon HX 290E Quick start guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info