603502
14
Zoom out
Zoom in
Previous page
1/18
Next page
Page 16 FF525 Installation Manual
5. INSTALLATIONS TIPS
5.0 How can I disconnect the cables from the FF525 in case I need to do so
for the installation?
· Open the FF525 box by unscrewing the four screws (see Figure on Par. 2.3.1).
· Once the screws are removed, pull out the panel and the Printed Circuit Board (PCB).
Unscrew the cables from the PCB.
· Wire the cables as needed.
· Reconnect the cables to the PCB.
· Push the panel towards the case (be sure to have well positioned the rubber gasket).
Close the FF525 box by screwing the four screws.
5.1 LED Status Indicator
The FF525 has a small LED that blinks. There are seven different LED behaviours,
representing seven different diagnostic conditions described below.
· OFF : DC power is not being supplied to the
FF525.
· ON CONTINUOUSLY : The transducer is not connected to the
Chart Plotter and problem with cable of the
transducer cable.
· 1 LONG FLASH EVERY 2 SECONDS : The FF525 is not connected with the Chart
Plotter. Black Box is working properly, but
it is not connected to the Chart Plotter.
Configure the I/O Port.
· 2 SHORT FLASHES EVERY 2 SECONDS: The FF525 is connected to the Chart
Plotter and is operating correctly.
· 3 SHORT FLASHES EVERY 2 SECONDS: A not-STANDARD HORIZON transducer
(without transducer ID) has been connected
· 4 SHORT FLASHES EVERY 2 SECONDS: No transducer connected.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon FF-525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon FF-525 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Standard Horizon FF-525

Standard Horizon FF-525 User Manual - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info