603502
27
Zoom out
Zoom in
Previous page
1/32
Next page
CPN and FF525 Operation Manual Page 29
5 - OPERATION TIPS
How can I set optimal operating parameters?
Optimal operating parameters can be set accordingly with the intended use of the Fish
Finder, to quickly get optimal operational parameters for fishing it is may be best to select
the FISH preset from the Fish Finder Setup menu, while for cruising it is may be best to select
the CRUISE preset.
What are preset modes?
Preset modes are pre-defined settings of the Fish Finder operating parameters. You can
use them to quickly set the Fish Finder in the most commonly used operating modes.
These are:
· CRUISE: sets Fish Finder in Full Auto mode with the sensitivity settings (GAIN OFFSET,
NOISE level and STC) optimized for displaying the bottom while underway.
· FISH : sets the Fish Finder in Full Auto mode with the sensitivity setting optimized
for fish finding.
How can I restore the Fish Finder to factory default settings?
While the Fish Finder page is shown, tapping anywhere on the screen brings up the Soft
Keys: tap on the
Soft Key and then tap on TRANSDUCER to select it. When
the Transducer Setup menu appears tap on
SET DEFAULTS. Note that this operation set
all default settings, not only the working defaults.
Can I always leave the Fish Finder in Full Auto(Auto Gain and Auto Range)
mode?
Yes, but note that the Full Auto mode suits the 90% of the cases, however in extreme
situations the Auto modes may fail and thus it is necessary to switch to the Manual mode.
What are extreme situations in which Auto modes may fail?
When the bottom is very deep, at high boat speed, when the bottom is very shallow (< 5 Ft),
when the water is full of materials in suspension, with bad sea conditions.
What should I do if the Auto modes fail?
Failure of Auto modes can happen for various reasons. Hereafter you can find a range of
possibilities.
Auto Range fails in very shallow waters displaying a digital depth readout
deeper than the actual value. What should I do?
This usually happens if the STC is set to LONG or MID and the bottom is shallow or SHORT
if the bottom is very shallow causing the Auto Range to hook to the second or third echo from
the bottom (since in shallow waters the sound bounces more times back and forth the
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon FF-525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon FF-525 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Standard Horizon FF-525

Standard Horizon FF-525 Installation Guide - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info