603452

Standard Horizon Explorer GX1700 Manual

23
Zoom out
Zoom in
Previous page
1/132
Next page
Page 23
GX1600/GX1700
6.10 CHANGING COG TO TRUE OR MAGNETIC
Allows the GPS COG (Course Over Ground) to be selected to show in “True”
or “Magnetic”. Factory default is “True” however by following the steps below
the COG can be changed to “Magnetic”.
1. Press and hold the
key until “
Setup Menu
”
appears, then select “
GPS SETUP
” with the
/ key.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
General Setup
-Setup Menu-
CH Function Setup
DSC Setup
Waypoint Setup
MMSI Setup
GPS SETUP
QUIT
SELECT
QUIT
SELECT
-GPS Setup-
MAGNETIC
Coodinate System
Pinning
Time Offset
Time Area
Time Display
QUIT
ENT
-Magnetic-
TRUE
Magnetic
2. Press the soft key, then press the
/ key to select “
MAGNETIC
”.
3. Press the
soft key.
4. Press the
/ key to select “
MAGNETIC
” or
“
TRUE
”.
5. Press the
soft key to store the selected
setting.
6. Press the
soft key twice to return to radio
operation.
NOTE
Setting to “Magnetic” is effective only when the RMC sentences
with magnetic data are input from external devices such as a GPS
receiver. It is ineffective when using the internal GPS of the GX1700.
6.11 OPTIONAL RAM3
(
CMP30
)
INSTALLATION
The GX1600 and GX1700 are capable of connecting a RAM3
(
CMP30
)
Remote Station Microphone to remotely control the radio and DSC functions.
In addition the GX1600 and GX1700 can operate as a full function intercom
system between the RAM3 and the radio.
1. Connect the extension cable to
the remote microphone eight
pin connector on the rear panel,
then tighten the cable nut (see
illustration at the right).
2. Install the ferrite core (supplied with the RAM3
(
CMP30
)
Remote Station
Microphone) to the extension cable, then snap its two halves together,
per the illustration on the next page.
GX1600_GX1700_usa_EM048N161.indd 23 2013/03/13 14:43:59
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Explorer GX1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Explorer GX1700 in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info