603452

Standard Horizon Explorer GX1700 Manual

14
Zoom out
Zoom in
Previous page
1/132
Next page
GX1600/GX1700
Page 14
6.3.2 Optional MMB-97 Flush Mount Bracket
1. Use the supplied template to mark the location where the rectangular hole
is to be cut. Conrm the space behind the dash or panel is deep enough
to accommodate the transceiver (at least 3.54 inches (90 mm) deep).
There should be at least 1/2 inch (1.3 cm) between the transceiver’s
heatsink and any wiring, cables or structures.
2. Cut out the rectangular hole 2.82” H x 5.39” W (72 x 137 mm) and insert
the transceiver.
3. Fasten the brackets to the rear panel of the transceiver (see illustration
at the right).
4. Turn the adjusting screw to adjust the tension so that the transceiver is
tight against the mounting surface.
6.42”
(
163 mm
)
Adjusting Screw
NOTE (GX1700)
A GPS receiver and antenna of the GX1700 is located in the front
panel. In many cases the radio may be flush mounted, however
before cutting holes to ush mount the radio it is recommended to
temporarily connect the radio to power and turn on in the location
where it will be ush mounted to conrm it is able to receive a GPS
location on it’s display. If the radio is not able to receive a location, a
GPS Chart plotter with NMEA 0183 output or the optional Standard
Horizon external GPS antenna may be needed to receive GPS
satellite signals.
To use the optional Standard Horizon external GPS antenna
(Q7000619A), the GX1700 internal GPS Unit Power must be turned
OFF (refer to section “14.1 UNIT POWER (GX1700)”) and the GPS
Selection changed to External GPS (refer to section “14.9 GPS
SELECTION (GX1700)”).
GX1600_GX1700_usa_EM048N161.indd 14 2013/03/13 14:43:44
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Explorer GX1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Explorer GX1700 in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info