Manual Standard Horizon Eclipse DSC - GX1150 (page 48 of 80) (English)

603456

Zoom out

Zoom in

1/80

GX1150Page 48

6. Press the key again to transmit the

Group Call signal.

7. After the GROUP CALL is transmitted, all

the radios in the group will switch to the

channel which is selected on step 5 above.

8. Press the key to return to radio opera-

tion mode.

9. Listen to the channel to make sure it is not

busy, then key the microphone and call the

other vessels you desire to communicate

with.

Manual Calling

You may enter an MMSI number manually to contact without the Setting up the

Group call number.

1. Press the key. The “DSC MENU” will ap-

pear.

2. Press the / keys to select “GROUP”.

(To cancel, press the key or key.)

3. Press the key. The transceiver will beep,

and the “Group Directory” will appear.

4. Press the / keys to select

“MANUAL”, then press the key.

5. Press the / keys to scroll through

numbers, 0-9. To enter the desired number and

move one space to the right press the key.

Repeat this procedure until all nine space of the

MMSI number which you want to contact are en-

tered.

6. If a mistake was made entering in the MMSI num-

ber, repeat pressing the microphone’s key

until the wrong number is selected, then press the

/ keys to correct the entry.

7. When finish the entering the MMSI number, press

and hold the key.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1150 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon Eclipse DSC - GX1150 Manual

Product: