Manual Standard Horizon Eclipse DSC - GX1150 (page 31 of 80) (English)

603456

Zoom out

Zoom in

1/80

Page 31GX1150

12.2.2 Programming the MMSI

WARNING

A User MMSI can be input only once. Therefore, please be careful

not to input the incorrect MMSI number. If you need to change the

MMSI number after it has been entered, the radio will have to be re-

turned to Factory Service. Refer to the section “14.2 FACTORY SER-

VICE.”

1. Press and hold down the

key until the

“SETUP MENU” appears.

2. Press the key repeatedly until the

“MMSI SETUP” menu appears.

3. Press the key. The display will show a series

of dashes.

4. Press the / keys to select the first

number of your MMSI, then press the

key to step to the next number.

5. Repeat step 4 to set your MMSI (up to nine

digits).

NOTE

If a mistake was made, pressing the

key on the microphone will step

to previously entered numbers and will

allow the number to be changed us-

ing the / keys.

6. When finished programming the number,

press and hold the key. A confirmation

message appears on the display. Input your

MMSI again, then press and hold the key.

7. Press the key to store the number in memory

and return to radio operation mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1150 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon Eclipse DSC - GX1150 Manual

Product: