603455

Standard Horizon Eclipse DSC - GX1100S Manual

39
Zoom out
Zoom in
Previous page
1/76
Next page
Page 39GX1100S
Manual Calling
You may enter an MMSI number manually to contact without storing it in the
Individual Directory.
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC MENUDSC MENU
DSC MENUDSC MENU
DSC MENU”
will appear.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select
“
INDIVIDUALINDIVIDUAL
INDIVIDUALINDIVIDUAL
INDIVIDUAL”. (To cancel, press the
[
16/9
]
or
[
CLR
(
WX
)]
key.)
3. Press the
[
ENT
]
key. The transceiver will beep,
and the “Individual directory” will appear.
4. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select
“
MANUALMANUAL
MANUALMANUAL
MANUAL”, then press the
[
ENT
]
key.
5. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to scroll
through numbers, 0-9. To enter the desired num-
ber and move one space to the right, press the
[
ENT
]
key. Repeat this procedure until all nine
spaces of the MMSI number which you want to
contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone’s
[
H/L
]
key until
the wrong number is selected, then move the chan-
nel knob to correct the entry.
7. When finished entering the MMSI number, press
and hold the
[
ENT
]
key.
8. Press the
[
ENT
]
key, then press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select the operating channel you
want to communicate on and press the
[
ENT
]
key.
9. Press the
[
ENT
]
key again to transmit the individual
DSC signal.
10. After the INDIVIDUAL CALL is transmitted, if a reply
signal is not received, “
WAIT FOR ACKWAIT FOR ACK
WAIT FOR ACKWAIT FOR ACK
WAIT FOR ACK” notation will
show on the display. To send the call again, press
the
[
T
(
DOWN
)]
key followed by the
[
ENT
]
key.
11. When an individual call acknowledgment is re-
ceived, the established channel is automatically
changed to the channel which is selected on step
8 above and a ringing tone sounds.
12. Press the
[
CLR
(
WX
)]
key to listen to the channel
to make sure it is not busy, then key the micro-
phone and call the other vessel you desire to communicate with.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Eclipse DSC - GX1100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1100S in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info