603455
30
Zoom out
Zoom in
Previous page
1/76
Next page
GX1100SPage 30
11.3 DISTRESS ALERT
The GX1100S is capable of transmitting and receiving DSC Distress messages
to all DSC radios. The GX1100S may be connected to a GPS to also transmit
the Latitude and Longitude of the vessel.
NOTE
If a GPS with NMEA output is not connected to the radio, the GX1100S
will beep 10 minutes after the radio is turned on. After that the GX1100S
will beep every 4 hours alerting to connect a GPS.
11.3.1 Transmitting a Distress Alert
NOTE
To be able to transmit a Distress Alert an MMSI number must be pro-
grammed, refer to section “11.2.2 Programming the MMSI.”
In order for your vessels location to be transmitted either connect a GPS to the
GX1100S (refer to section “8.4 ACCESSORY CABLE”) or manually input your
postion (refer to section “11.11 MANUAL INPUTTING OF THE GPS LOCATION”).
1. Lift the red spring loaded DISTRESS cover, then
press and hold the
[
DISTRESS
]
key. The “
DIS-DIS-
DIS-DIS-
DIS-
TRESSTRESS
TRESSTRESS
TRESS” menu will appear on the LCD and the ra-
dios display will count down (
3S 3S
3S 3S
3S Æ
2S 2S
2S 2S
2S Æ
1S 1S
1S 1S
1S) and
then transmit the Distress Alert. The backlight of
the LCD and keypad flashes while the radios dis-
play is countdown.
2. The transceiver will watch for a DSC acknowledg-
ment transmission on CH70 and also receive calls
on CH16.
3. If an acknowledgement is received, select chan-
nel 16 and advise your distress situation.
4. If no acknowledgment is received, the Distress
Alert is repeated at approximately 4 minute inter-
vals until a DSC acknowledgment is received.
5. When a DSC Distress acknowledgment is re-
ceived, a DSC Distress Alarm sounds and channel 16 is automatically se-
lected. The LCD shows the MMSI of the ship responding to your distress.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY ACK: relay acknowledgment signal is received from another
vessel or coast station.
6. To cancel the DSC Distress Alarm signal from the speaker, press any key.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Eclipse DSC - GX1100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1100S in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info