603455

Standard Horizon Eclipse DSC - GX1100S Manual

25
Zoom out
Zoom in
Previous page
1/76
Next page
Page 25GX1100S
10.11.2 Memory Scanning
(
M-SCAN
)
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
3. Press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is shown on the LCD
which indicates the channel has been programmed
into the transceivers memory.
4. Repeat steps 2 and 3 for all the desired channels
to be scanned.
5. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
(
MEM
)]
key until “MEM” disappears from
the LCD.
6. To start scanning, just press the
[
SCAN
(
MEM
)]
key momentarily. “
M-SCANM-SCAN
M-SCANM-SCAN
M-SCAN”
appears on the LCD. Scanning will proceed from
the lowest to the highest programmed channel
number and will stop on a channel when a trans-
mission is received.
7. The channel number will blink during reception.
8. To stop scanning, press the
[
16/9
]
or
[
CLR
(
WX
)]
key.
10.11.3 Priority Scanning
(
P-SCAN
)
In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to another channel from Channel 16 in the Radio Setup
Mode, refer to section “12.5 PRIORITY CHANNEL SET.”
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
3. Press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is shown on the display
which indicates the channel has been programmed
into the transceivers memory.
4. Repeat step 2 for all the desired channels to be
scanned.
5. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
(
MEM
)]
key until “MEM” disappears from
the LCD.
6. To start priority scanning, just press the
[
SCAN
(
MEM
)]
key momentarily. “
P-SCANP-SCAN
P-SCANP-SCAN
P-SCAN” appears
on the LCD. Scanning will proceed between the
memorized channels and the priority channel. The
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Eclipse DSC - GX1100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1100S in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info