603455

Standard Horizon Eclipse DSC - GX1100S Manual

18
Zoom out
Zoom in
Previous page
1/76
Next page
GX1100SPage 18
KEYPAD
[
S
(
UP
)]
/
[
T
(
DOWN
)]
KEYS
The
[
S
(
UP
)]
and
[
T
(
DOWN
)]
keys are used to select a desired chan-
nel and to select items in the DSC OPERATION and SETUP menus.
[
16/9
]
Key
Immediately recalls channel 16 from any channel location and automati-
cally selects high power. Holding down this key recalls channel 9. Press-
ing the
[
16/9
]
key again reverts to the previous selected working channel.
Secondary use
Press and hold the
[
16/9
]
key then press the
[
CLR
(
WX
)]
key to switch
between the USA, Canadian, and International Channel Groups.
[
SCAN
(
MEM
)]
Key
Press this key to start and stop the scanning of programmed channels.
Refer to section “8.10 SCANNING” for details.
Secondary use
To add a channel into the scan memory, select the channel and press
and hold the
[
SCAN
(
MEM
)]
key until “MEM” is shown on the display.
To delete a memorized channel from scan memory, select the channel
and press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is removed from
the display.
[
DISTRESS
]
Key
Used to send a DSC Distress Call. To send the distress call refer to section
“9.3.1 (Transmitting A Distress Alert).”
DC INPUT CABLE
Connects the radio to a DC power supply capable of delivering 12V DC.
EXTERNAL SPEAKER CONNECTION CABLE
Connects the GX1100S to an external speaker.
GPS RECEIVER CONNECTION CABLE
Connects the GX1100S to a GPS receiver.
GND TERMINAL
Connects the GX1100S to a good ground, for safety and optimum perfor-
mance.
Normally, the GND connection to the heat sink is not needed. However,
when the DC power cable connection to the radio has a long run, the trans-
mitter may become unstable and the receiving audio may be noisy. In such
a case, connect a large diameter, short cable between this terminal on the
heat sink and battery ground.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Eclipse DSC - GX1100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1100S in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info