Manual Standard Horizon Eclipse - GX1250SA (page 17 of 24) (English)

603457

Zoom out

Zoom in

1/24

GX1250SA Owner’s Manual page 15

5 OPERATION

5.1 RECEPTION

1. After the transceiver has been installed, ensure that the power

supply and antenna are properly connected.

2. Turn the VOL/PWR knob until the transceiver turns on.

3. Turn the SQL knob fully counterclockwise. This state is known as

“squelch off”.

4. Turn up the volume until noise or audio from the speaker is at a

comfortable level.

5. Turn the SQL knob clockwise until the random noise disappears.

This state is known as the “squelch threshold.”

6. Press the UP

or DOWN key to select the desired channel. Refer

to the channel chart in the OWNER’S MANUAL SUPPLEMENT for

available channels.

7. When a message is received, adjust the volume to the desired

listening level.

5.2 TRANSMISSION

1. Perform steps 1 through 6 of RECEPTION.

2. Before transmitting, monitor the channel to ensure it is clear. THIS

IS AN FCC REQUIREMENT!

3. Press the PTT (push-to-talk) switch. The TX indicator on the LCD is

displayed.

4. Speak slowly and clearly into the microphone.

5. When the transmission is finished, release the PTT switch.

6. Refer to the OWNER’S MANUAL SUPPLEMENT for standard

transceiver operating procedures.

NOTE

This microphone should be positioned within 1 inch (2 cm) from the

mouth for optimum performance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse - GX1250SA in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon Eclipse - GX1250SA Manual

Product: