603484

Standard Horizon CPN1010i Manual

157
Zoom out
Zoom in
Previous page
1/188
Next page
Page 158 Owner’s Manual
PWR/ACC1 Connections
PWR/ACC1 contains 3 NMEA RS232 type outputs and 2 NMEA RS232 type inputs (RS232
has one common NMEA Signal ground).
ACC2 Connections
ACC2 contains 1 NMEA RS422 (A and B signal wires) type Port.
PORT Input Selections
Each Port may be configured to be able to connect to specific devices:
· NMEA-0183 4800 Baud
· GPS Auto
1
- External GPS devices of unknown or different than 4800 Baud. The system
will automatically detect connected GPS’s Baud Rate and will allow correct
communication with this device.
· Fish Finder
1
- select when optional FF525 is connected (Port2 default set to Fish Finder).
· AIS 38400 - select when AIS Receiver or transponder is connected to an input
· Disabled - disables the Port
1
Not available for ACC2.
To change a selection, follow the procedure below:
1. Press the
key, tap on Setup Menu.
2. Tap on
ADVANCED.
3. Tap on
IN/OUT Connections.
4. Tap on the Port Input to be changed, than tap on the desired input.
5. Press the
key to exit the menu.
PORT Output Sentences
When NMEA-0183 4800 is selected the CPN Series Chart Plotter allows selection of the
NMEA-0183 Output sentences. The NMEA-0183 sentences read from external devices are
listed in the Par. 8.1 “CPN700i” and Par. 8.2 “CPN1010i”.
To enable or disable output sentences follow the procedure below:
1. Press the
key, tap on Setup Menu.
2. Tap on
ADVANCED.
3. Tap on
IN/OUT Connections.
4. Tap on the Port Output Sentences.
5. Tap on the desired sentence to enable or disable.
6. Press the
key to exit the menu.
CPN Series Chart Plotter to NMEA-0183 Connection Examples
VHF Radio Connection Example - RS232 and RS422 Connections
The following image shows how a VHF radio with RS232 Connections (NMEA Common/
Ground) or RS422 type (A&B Signal wires) may be connected.
… 157 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon CPN1010i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CPN1010i in the language / languages: English as an attachment in your email.

The manual is 17,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info