603484
15
Zoom out
Zoom in
Previous page
1/188
Next page
Page 16 Owner’s Manual
MARK key places a Mark when on the Chart page
ShuttlePoint knob moves the cursor on the Chart page and selects items in menus
ZOOM keys changes the scale of the chart to show a smaller or a wider area.
When pressed allows the rotary knob or touch screen controls to be used
to change zoom levels.
ROTATE key enables the chart to be rotated using the rotary knob or touch screen
controls
CHART key selects the Chart Menu to change between 2D and 3D chart modes
and selects Vector, Satellite, or Raster chart display
TILT key enables the chart to be tilted using the rotary knob or touch screen
controls
MOB key places a Man Over Board mark
Rotary knob used to enter a function or rotate, tilt and zoom the chart
Intelligent key opens a window to select Internet Browser, Multimedia Player,
P2N Link, adjust Brightness and Touchscreen Calibration. Press
and hold to enter the Quick Access Menu for Track, Alarms and
AIS settings.
Internet and Multimedia videos can not be accessed while in Chart Mode mode, however you can listen
to music while navigating (press the Intelligent key to toggle between Chart Mode and Media Player).
PWR key turns On/Off the CPN Series Chart Plotter and adjusts brightness
SD CARD slot used to insert optional C-MAP 4D Cartography, view pictures,
listen to audio files, save User Points and update software from an
optional SD CARD.
1.2.1 TOUCHSCREEN
The CPN700i and CPN1010i use a touchscreen display. Many functions are controlled by
touching the display or using the dedicated keys,
ShuttlePoint or rotary knobs.
The Touchscreen Calibration can be selected from the Startup Screen page by pressing
and holding the
key for 5 seconds, or by pressing the Intelligent key from any
screen other than Startup Screen. Once the calibration screen is displayed, you must tap
on the center of the Cross-Hair as it moves around the screen, following the procedure
shown. When completed and prompted press the
rotary knob (or the ShuttlePoint
knob if enabled, see ShuttlePoint Enter item in the Par. 2.1.4 “Settings in General Setup
Menu”) to complete the calibration process and store the settings. Calibration mode may
be exited without storing the settings by pressing the
key.
Cleaning of the CPN Series Chart Plotter screen is a very important operation and must be done carefully.
Since the surface is covered by an anti-reflective coating, the procedure for cleaning all the surfaces can
be performed using the following procedure: use a clean, soft, lint-free cloth to clean the glass. We
recommend using a micro-fiber cloth. Spray a small amount of ammonia-free cleaner (isopropyl alcohol)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon CPN1010i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CPN1010i in the language / languages: English as an attachment in your email.

The manual is 17,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info