603491
84
Zoom out
Zoom in
Previous page
1/121
Next page
Page 86 CP590
12.5.0 GPS Setup Menu
From the GPS Status page it is possible to activate the GPS Setup menu.
1. Press [MENU], move the ShuttlePoint knob to enter
GPS STATUS page and press
[ENT].
2. Press and hold [ENT]. The GPS Setup menu
1
appears on the screen. See the following
table:
Restart GPS : Restarts all GPS processes. Once executed, the message "Done" is shown.
Navigation Speed : Allows setting the Navigation Speed among Low and High. The default setting is High.
Speed Filter : Allows to resolve erratic speed readings in rough seas. Available values are Off, Low,
Medium, High. The default setting is Off.
Differential Correction Source : Allows setting what kind of Differential Correction will be used by the GPS between
WAAS-EGNOS and none. The default setting is WAAS-EGNOS.
3. Move the ShuttlePoint knob to highlight the preferred item and press [ENT].
4. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left until the menu disappears.
Figure 12.5.0 - GPS Setup menu
1
NOTE
1
The GPS Setup menu changes depending on the type of the external GPS used.
12.5.1 WAAS/EGNOS Setting
From the GPS Status page it is possible to disable the WAAS/EGNOS function.
1. Press [MENU], move the ShuttlePoint knob to enter
GPS STATUS page and press
[ENT].
2. Press and hold [ENT]. The GPS Setup menu appears on the screen.
3. Move the ShuttlePoint knob to highlight
DIFF CORRECTION SOURCE and press
[ENT].
4. Move the ShuttlePoint knob to highlight
None (to disable) and press [ENT].
5. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left until the menu disappears.
12.6 NMEA DISPLAY PAGE
The CP590 is capable of displaying information in the customizable data windows from
external NMEA-0183 devices. Depth Sounder, Speed Log with Temp, Wind Speed and
Direction, Flux Gate Compass, and GPS information can be shown in any of the boxes. The
NMEA sentences read from external devices are: BWC, DSC, DSE, GGA, GLL, GSA, GSV,
HDG, HDM, HDT, RMC, VHW, VTG, DPT, DBT, MTW, VWR, VWT, TLL, WPL, RTE. To
display the desired NMEA Display page follow this procedure:
1. Press [MENU], move the ShuttlePoint knob to highlight
NMEA DISPLAY and press
[ENT].
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon CP590 - GPS Chart Plotter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CP590 - GPS Chart Plotter in the language / languages: English as an attachment in your email.

The manual is 8,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info