603491

Standard Horizon CP590 - GPS Chart Plotter Manual

25
Zoom out
Zoom in
Previous page
1/121
Next page
CP590 Page 27
3.2 TIME SETUP
The time information supplied by the GPS satellites is in Universal Time Coordinates (UTC
or Greenwich England Mean Time). To change the CP590 to read the correct time, first you
must know the correct offset for your Time Zone, and then whether or not you are observing
Daylight Saving time. For example on the West coast of the United States or Pacific
Standard Time the offset needed would be –08:00 or –07:00 for Daylight Saving time,
Eastern Standard Time –05:00 or –04:00 for Daylight Saving time.
Figure 3.2 - Adjusting Time
The Time Setup menu allows you to enter a Time Zone offset for your location, selection
to automatically adjust the time for Daylight Saving and to configure the time in 12 or 24 hour
formats.
1. Press [MENU], move the ShuttlePoint knob to highlight
SETUP MENU and press
[ENT].
2. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight
TIME SETUP and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight
TIME ZONE and press [ENT] or move the
ShuttlePoint knob to the right.
5. Look at the table and find the time zone for your area. Move the ShuttlePoint knob up
or down to select the desired zone and press [ENT].
6. Next move the ShuttlePoint knob to highlight
DAYLIGHT SAVING and press [ENT] or
move the ShuttlePoint knob to the right.
7. Daylight Saving menu has 2 options:
OFF Select Off when your location does not recognize Daylight Saving Time
ON Select On to manually turn Daylight Saving Time On. This is the default.
8. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
NOTE
By setting the time in the steps below, the time shown on the Celestial page is automatically set up.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon CP590 - GPS Chart Plotter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CP590 - GPS Chart Plotter in the language / languages: English as an attachment in your email.

The manual is 8,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info