603491

Standard Horizon CP590 - GPS Chart Plotter Manual

22
Zoom out
Zoom in
Previous page
1/121
Next page
Page 24 CP590
3. When the CP590 is first turned on it will take some time for the GPS to acquire a fix of
your position. Look closely at the GPS Status page and you will see satellites and
relative signal strengths of each satellite. After a fix is received the CP590 will
automatically switch to the Chart page with the Ship Icon centered on the screen.
Figure 3.1.0b - GPS Status and Chart pages
4. On the Chart page the ShuttlePoint knob is used to pan around the chart. Move the
ShuttlePoint knob to the left and you will notice a cross hair
appear, this is called the
cursor.
5. When you move the ShuttlePoint knob you will notice DST and BRG values in the data
window change. This shows the Distance and Bearing from the GPS fix of your vessel
to the position of the cursor.
6. If the cursor is moved to the edge of the screen the CP590 will automatically pan in the
desired direction.
3.1.1 Cursor Vs. Home Mode
Cursor Mode
When the cursor is shown on the Chart page, the CP590 is in Cursor Mode.
In Cursor Mode the position of the vessel will not stay in the center of the page and will move
right off the edge of the screen (as your boat moves). Cursor Mode allows you to pan around
and look at areas on the chart. In this mode you can also create Marks, Routes, measure
Distance and Bearings from your current position.
Home Mode
When the ship icon is shown on the Chart page (cursor is not shown) you are in Home
Mode. Now as the ship moves through the water the vessel’s position will be kept in the
center of the display.
NOTE
To change from Cursor Mode to Home Mode press [CLR].
3.1.2 Cursor and Menu Selection Speed
The CP590 allows you to control the speed the cursor moves when the ShuttlePoint knob
is pressed. To change the speed follow the procedure below.
1. Press [MENU], move the ShuttlePoint knob to highlight
SETUP MENU and press [ENT].
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon CP590 - GPS Chart Plotter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CP590 - GPS Chart Plotter in the language / languages: English as an attachment in your email.

The manual is 8,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info