Manual Standard Horizon CP300i (page 36 of 42) (English)

603493

Zoom out

Zoom in

1/42

Page 38 Radar Operation Manual

5.6 The Radar sensitivity appears to be low

Radar sensitivity depends on several factors. To increase sensitivity act as follows:

· Execute the Automatic Tuning procedure to ensure that the Radar is perfectly tuned.

· Increase the GAIN.

· Reduce the SEA clutter, since the SEA clutter has the effect to reduce the echo intensity

of nearby targets.

· Turn Off the RAIN clutter, since it has the effect to reduce the echoes intensity of big

targets.

5.7 Radar targets are delayed with respect to the antenna rotation?

The Radar image on the GPS is updated every 2.5 seconds as information is acquired from

the antenna. This could cause a mis-match between the actual target position and the

targets shown on the screen.

5.8 Radar target appear to be pulsing

This is a rather common problem for any Radar. For long distance targets, when the Radar

pulse hits a target, the reflection strength which depends on the hit angle. Perpendicular hits

give the strongest echo. Hard objects give stronger echo and soft objects give weaker echo.

To eliminate the pulsing effect of Radar targets the Trails function may be used.

5.9 Stationary target appear to be oscillating around their actual position

Radar targets may appear to be oscillating around their actual position due to the movement

of your vessel. In fact even a minimum oscillation of the position where the Radar is located

may cause an apparent movement of the targets detected.

For short distance targets, surface waves lower the detectivity. The SEA clutter should be

adjusted to properly to maximize the detectivity.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon CP300i in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon CP300i Manual

Product: