Manual Stadler Form Sam (page 9 of 76) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

807158

Zoom out

Zoom in

1/76

• Do not use this heater in the immediate surroundings of a bath, a shower

or a swimming pool (the appliance is not splash-proof).

• For indoor use only.

• Do not store the appliance outdoors.

• Store the appliance in a dry place inaccessible to children (pack the appliance).

• Prior to any maintenance, cleaning and after each use, switch off the ap-

pliance and unplug the mains cable from the socket.

• Repairs to electrical appliances must only be carried out by a qualified

electrical technician.

Setting up / operation

Note: the operation of Sam and Sam little differs. Pay attention to the prod-

uct description at the beginning of each subsequent point. If no product is

mentioned, the operation applies to both devices.

Note: Make sure that there is always sufficient space between the appli-

ance and the wall or other large objects (> 50 cm). The air flow must not be

blocked by objects of any kind.

1. Having set up Sam / Sam little in the desired position connect the cable

(1) to the household supply socket.

2. First, push the main switch for power supply (3) on the back of the appli-

ance (on Sam little this switch is also the On/Off button).

3. Sam: Switch on the appliance by pressing the On/Off button (7). The

target temperature appears on the display.

4. Sam: The target temperature can be changed from 0 °C (cooling mode) to

35 °C or maximum «Hi» over the buttons (9) «Temperature». The heating

mode is active from 1 ° – 35 °C & «Hi». The digit flashes in configuration

mode. Pushing the «+» button increases the target temperature. Pushing

the «–» button reduces the target temperature. The setting is saved if

no change occurs on the control panel for selection of temperature for

three seconds. The current room temperature is subsequently shown

on the display.

Info: The appliance switches off the heating element when the target

temperature is reached and the temperature indicator flashes on the

display. The ventilator remains switched on for 15 seconds at the lowest

level to cool down the heating element. The current temperature is then

measured approx. every 15 minutes (the fan runs for 1 minute at the

lowest level). The appliance switches on again if the room temperature

recorded drops below the set target temperature.

5. Sam little Thermostat (9): The thermostat allows you a variable tempe-

rature adjustment. Setting: for maximum temperature turn to the left

(«+» symbol), for minimum temperature, turn the control to the right («-»

symbol).

Recommendation: Turn the thermostat control to the left to the maxi-

mum. If the desired room temperature has been reached, turn the ther-

mostat control to the right until the appliance switches off. If the room

temperature drops, then Sam little switches on again automatically with

a slight delay.

6. Sam: Cooling mode: the heating element switches off if the temperature

is set to 0 °C and the ventilator blows cool air out of the appliance. The

LED light (8) changes from red to blue. There is no temperature shown

on the display in cooling mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Sam in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Sam Manual

Product: