807159

Stadler Form Sam Little Manual

10
Zoom out
Zoom in
Previous page
1/76
Next page
7. Sam: The heat output level can be changed over the buttons (10) «Power
Level». Typing «+» increases the output level. Typing «–» reduces the
output level.
Output level 1 =700 W
Output level 2 =1‘000 W
Output level 3 =1‘500 W
Output level 4 =2‘000 W
The setting is saved if no change occurs on the control panel for selec-
tion of heat output level for three seconds. The current room tempera-
ture is subsequently shown on the display.
8. Sam little: Using the output button (10), you can control the heating out-
put of Sam little:
a. Button in = 1‘500 W
b. Button out = 800 W
9. Sam: Auto mode is activated (deactivated) by pressing the «Auto Mode»
button (11). «Auto Mode» is shown in the display. The preset target
temperature of 22 °C can be changed using the buttons for selection of
temperature (9). The heat output level is selected automatically in auto
mode - depending on the room temperature. The smaller the difference
between the room temperature and the target temperature, the smaller
the heat output level selected. We refer to this as «Adaptive HeatTM»
technology. This allows Sam to make sure that the target temperature
is reached, quickly and efficiently, and maintained. Sam thus prevents
a sharp temperature drop and prevents the appliance from being con-
stantly switched on and off. Auto mode is deactivated if the heat output
level is changed manually (10).
Info: The appliance switches off the heating element when the target
temperature is reached and the temperature indicator flashes on the
display.
10. Turn off the device by pressing the On/Off button (7) on Sam and the
main switch (3) on Sam little. The ventilator remains switched on for
15 seconds at the lowest level to cool down the heating element. The
appliance saves the temperature input and the heat output level even if
the appliance is switched off.
11. Protection against overheating: the appliance is equipped with over-
heating protection which switches off the appliance in the event of a
technical fault or improper use (the ventilator continues to run for some
time at the lowest level to cool down the appliance). Should this occur,
rectify the fault or cease the improper use (e.g. 50 cm space around the
appliance, do not cover the appliance, set the appliance up in an upright
position). Once the appliance has cooled down it can be put back into
service.
12. Sam: The temperature indicator can be changed from Celsius to Fahr-
enheit and vice versa by pressing the «Auto Mode» button (11) for five
seconds.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stadler Form Sam Little at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Sam Little in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info