Manual Stadler Form Leo (page 7 of 58) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

807161

Zoom out

Zoom in

1/58

If you would like to increase the speed by another level, press again. The

setting chosen is indicated by the number of LEDs illuminated under-

neath the button (5).

4. Activate swing mode by pressing the vertical swing mode button (6).

The appliance now swings at an angle of approx. -5°–85° to ensure

optimum distribution of cooling air throughout the room. Press the swing

mode button (6) again if the appliance is to remain at a certain angle.

When the vertical swing function is activated, the LED underneath the

button (6) will light up.

5. For optimum distribution of cooling air from left to right, activate the

horizontal swing function (7). Together with the vertical swing function,

this will create 3D air circulation throughout the whole room. There are

3 angle settings to choose from for the horizontal swing function: 60°,

90° or 180°. To select a setting, press the button for the horizontal swing

function (7) until the LED underneath your chosen angle setting lights

up. If the LED underneath the button (7) is not illuminated, the horizontal

swing function is deactivated.

6. Press the button for the selection of “Natural Breeze” mode (8) for natu-

ral wind conditions. The blue LED beneath the button (8) will now light

up. This mode provides an even more pleasant cooling effect, simulat-

ing a natural breeze. The fan speed of this breeze automatically varies

depending on the selected speed level.

7. By pressing the button for the timer (9) you can set the operating time

for between 1 and 7 hours (for example, 3 h = 1 h and 2 h LEDs lit, 7 h =

1 h, 2 h and 4 h LEDs lit). The selected time is displayed below the timer

button (9) with blue LEDs. Press once to set the operating time to 1 h,

press the button again for 2 h, and so on. The remaining time is indicated

by the illuminated LEDs below the timer button (9). The unit switches

off automatically after the set operating time has elapsed. If no LEDs

are lit below the timer button (9), the unit is set to continuous operation.

8. Switch off the appliance by pressing the on/off button (4).

9. The remote control (10) is magnetically attached to the right-hand side

of the device. It operates via infrared – for this purpose, point the remote

control at the infrared receiver (11) on the front of the unit. The battery

compartment (12) is on the back of the remote control (10). Press the

safety slider first of all and then pull down to open the battery com-

partment.

Cleaning

Prior to any maintenance, cleaning and after each use, switch off the appli-

ance and unplug the mains cable (3) from the socket.

Attention: Never submerge the appliance in water (danger of short-circuit).

• For external cleaning, rub with a damp cloth and then dry thoroughly.

• Make sure that the air inlet (13) and air outlet (14) are cleaned regularly to

prevent the build-up of dust. The air inlet (13) can be cleaned with a dry

brush or a vacuum cleaner.

• The air outlet grille (14) can be removed, making the fan blade (15) easy

to clean. Before doing so, make sure that the device is disconnected from

the mains. Gently turn the housing to a vertical position (see photo on

page 6). First of all, remove the screw (16) underneath on the housing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Leo in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1.54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Leo Manual

Product: