609264
9
Zoom out
Zoom in
Previous page
1/28
Next page
The appliance is not splash-proof.
Do not store or operate the appliance outdoors.
Store the appliance in a dry place inaccessible to children (pack the
appliance).
Setup / operation
1. Place JASMINE at the desired location on a flat surface. Connect the net-
work adapter (10) to the device and plug the adapter into a suitable socket.
2. Remove the lid (1) to fill with water and fragrance!
3. Now fill the water container (2) up to the maximum mark (MAX) with water.
Important: please do not carry JASMINE around whilst it is filled with water.
The water could run into the electronics.
4. Pour 2-3 drops of your favourite liquid fragrance directly into the water, it is
not necessary to mix them as the ultrasound membrane (4) does this for you.
5. Close the lid (1) again.
6. Then start operating JASMINE by pressing the on/off switch (5). After doing
this the white light at the front will come on. If this does not happen, check
whether there is sufficient water in the device or if the adapter is connected
to the electricity supply.
7. The interval mode makes it possible for you to operate the diffuser for a
whole day (approx. 21 hours), without needing to re-fill it. Press the key for
the interval function (6), the white light will then come on. Jasmine will now
diffuse fragrance into the room for 10 minutes. There will then be a break for
20 minutes. This mode means it is possible to diffuse the fragrances in pleas-
antly small doses into the air. The advantage: you don’t become accustomed
to the fragrances and can therefore still smell them all the time.
8. If you would like to top-up the water, switch the device off and pull the net-
work plug out. Remove the lid and fill the water up to the maximum mark.
Note: If you would like to change the fragrance, empty Jasmine completely
and clean the water container with a damp cloth. Fill Jasmine once again
and pour the drops into the device following the instructions.
Cleaning
Before maintenance and after every use, switch the device off and pull the
network adapter out of the socket. Before you clean JASMINE, the network
adapter must be unplugged.
Careful: Never dip the device in water (danger of short circuit).
To clean the outside, rub with a damp cloth and then dry thoroughly.
Internal cleaning: You can now clean the ultrasound membrane with a
conventional household de-scaler. Please do not try to scratch off de-
posits from the membrane with a hard object. For stubborn deposits, we
recommend that you de-scale the device several times in a row. After the
de-scaling rinse the base and then dry thoroughly.
Repairs/disposal
Repairs to electrical appliances must only be carried out by a qualified
electrical technician. If improper repairs are carried out, the guarantee
lapses and all liability is refused.
Never operate the appliance if the adaptor or plug is damaged, after it has
SF_Jasmine_Manual_EU.indd 9 18.07.11 11:03
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stadler Form Jasmine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Jasmine in the language / languages: English, German, Dutch, Danish, French, Spanish, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info