Manual Stadler Form Jack (page 10 of 38) (English, German, Dutch, Danish, French, Polish, Spanish, Finnish)

609263

Zoom out

Zoom in

1/38

3. You can start Jack by pushing on the on/off button (8). You can now see

the current humidity on the display (8). If for any reason the display shows

“no”, it means that there is no water in the humidier. Please ll in the water

tank (2) prior to pushing the on/off button.

4. By pushing repeteadly on the button for output (9) you can choose your

desired output level from small to high output.

5. If you push the button for the humidity level (10) you can choose the rela-

tive humidity between 40% - 70%. The humidier switches automatically

off as soon as the desired relative humidity is reached. If you desire to run

the humidier continuously, please choose the function “co”.

6. With the button for the pre heating (11) you can switch on the pre heating.

The water is being heated up to 80°C which allows the humidier to reach a

higher output. If you see the point in the lower right corner of the display (4),

the pre heating is switched on.

7. As soon as you see the information „no“ in the Display (4), the water tank

is empty and needs tob e refulled. Please take the water tank (2) and rell

it. After placing the water tank at its original position, Jack switches on

again automatically.

Note: Should you seen droplets (or other signs of dampness) on or around

the nut, then there is condensed water coming from the humidier. This

means that the air can no longer absorb the moisture from the humidier.

Please turn the output down so that droplets are no longer visible.

Cleaning

Before you clean the appliance always switch off and unplug the plug from

the socket.

Attention: Never submerge the unit in water (danger of short circuiting).

• To clean the outside, wipe with a damp cloth and then dry well.

• To clean the inside, remove the water tank (2), the fog outlet (1) and the

ionic silver cube (12). Then you can clean the ultrasonic membrane with a

normal household decalcier. Should not all residues be able to be removed,

then you can clean the ultrasonic membrane with the help of the cleaning

brush (front or reverse side). Please try not to scrape the membrane with a

hard object. With persistent calcication, we recommend that you decalcify

the unit several times in a row. After decalcifying, rinse the lower part and

then dry thoroughly.

• To clean the water tank, rinse it out with warm water. Should calcication

be visible, you can also decalcify the water tank. Afterwards, rinse out the

water tank and then dry.

Ionic Silver Cube

The ionic silver cube (12) prevents the growth of germs and bacteria in the

humidier due to the continuous release of silver ions. The use of an ionic

silver cube leads to a hygienic room climate. The lifetime of the ionic silver

cube is around one year. We therefore recommend that you replace the ionic

silver cube at the beginning of every humidifying season. The ionic silver

cube starts working as soon as it comes into contact with water, and also

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Jack in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish, Finnish as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Jack Manual

Product: