Manual Stadler Form Charly little (page 6 of 52) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

669376

Zoom out

Zoom in

1/52

• Never insert objects into the grille of the fan. Do not cover the appliance

during operation.

• Always disconnect the power cord from the socket before removing the

protection grille.

• Only connect the cable to alternating current. Observe the voltage infor-

mation given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does

not get trapped.

• Do not pull the plug from the socket with wet hands or by holding on to

the power cord.

• Do not use the appliance in immediate vicinity of a bath tub, a shower or a

swimming pool (observe a minimum distance of 3 m). Place the appliance

such that a person in the bath tub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power

cord to direct heat (such as a heated hotplate, open flames, hot iron sole

plates or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure a high stabil-

ity during its operation and make sure that no one can trip over the power

cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors.

• Store the appliance in a dry place inaccessible to children (pack the ap-

pliance).

• If the supply cord is damaged, it must be replaced by the manufacturer, or

its service agent, or a qualified person in order to avoid a hazard.

• Prior to any maintenance, cleaning and after each use, switch off the ap-

pliance and unplug the mains cable from the socket.

• Repairs to electrical appliances must only be carried out by a qualified

electrical technician.

Assembly (see page 2 and 3)

Attention: The protection grille must be properly closed prior to switch-

ing on the appliance so as to avoid any damage or hazards. Ensure that all

screws and securing nuts are firmly tightened. Only connect the power cable

to the socket once assembly has been completed.

A. Remove fixing screw (3) on underside of connector (1). Insert connector

(1) into foot (2) and secure with fixing screw for foot and connector (3).

B. Undo fixing screw (5) on connector (1). Locate motor housing (4) on con-

nector (1) and secure with fixing screw for motor housing and foot (5).

C. Remove securing nut for grille (6) from motor housing (4) and locate pro-

tection grille rear (7) on motor housing (4). When locating, ensure that

the handle (8) on protection grille rear (7) is on the top. Now screw secur-

ing nut for grille (6) back on to motor housing (4) so as to fix protection

grille rear (7) in position.

D. Attach fan blades (9) to motor housing (4) and secure in position with

fixing screw for fan blades and motor housing (10) (loosely attached to

fan blade). Tighten screw to secure fan blades (9).

E. Locate protection grille front (11) on protection grille rear (7). In doing

so, take care to ensure that positioning clip (12) on protection grille front

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form Charly little in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form Charly little Manual

Product: