636671
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
Turning the Unit ON:
Press and hold the button. The unit will "beep" with dual tone
and the LCD SCREEN will briefly display a SELF-TEST Screen.
Turning the Unit OFF:
Press and hold the button. The unit will "beep" with a signal tone
and the LCD Screen will turn blank.
Adjusting Speaker Volume:
1. Press the Up button to increase the Speaker Volume.
2. Press the Down button to decrease the Speaker Volume.
3. The Speaker Volume level is indicated by the number 1 to 8 displayed
on the LCD Screen.
Receiving a Signal:
The unit is continuously in the RECEIVE mode when the unit is ON
and not transmitting. When you receive a signal on the current channel,
the RX icon is displayed. (See "LCD SCREEN" for details) and red
LED indicator lights up.
Transmitting a Signal:
1. Check the channel activity by using MONITOR function (See below
"MONITOR" section). You'll hear static if the channel is unoccupied.
Don't TRANSMIT if someone is talking on the channel. Press and hold
the PTT button to TRANSMIT. The TX LED Indicator will light up in
red. Hold the unit in a vertical position with the MICROPHONE 2 to 3
inches from the mouth.
2. While holding the PTT button, speak into the unit using a normal
tone of voice.
3. Release the PTT button when you have finished transmitting.
NOTE: In order for other people to receive your transmission, they
must also be on the same channel you are currently using. Refer to
the "Changing Channels" section for more information.
Operation
Changing Channels:
The COMMUNICATOR has 8 available channels. To change channels:
1. Press the
button until the current channel number flashes on
the LCD Screen.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stabo FREECOMM 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stabo FREECOMM 150 in the language / languages: English, German as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stabo FREECOMM 150

Stabo FREECOMM 150 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info