805963
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
Removing the rear wheel (to repair a puncture)
40±5 Nm
15 mm
1. Cut the cable ties holding the waterproof motor
cable connector under the non-drive side chain
stay.
Separate the two halves of the connector this
requires some ‘wiggling’ of the connector to over-
come the sealing.
2. Loosen the wheel nuts using a 15 mm spanner
and remove the wheel.
3. When retting the wheel, ensure that the anti-ro-
tation washers tted to the motor axle are aligned
and slide up within the rear drop outs.
4. Tighten both wheel nuts to 40 Nm.
5. Reconnect the two halves of the motor connector
making sure that the arrows are aligned, before
pushing them rmly together.
6. Replace the cable ties to secure the motor cable
connector underneath the non-drive side chain
stay.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SR SUNTOUR Ebike 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SR SUNTOUR Ebike 2017 in the language / languages: English as an attachment in your email.

The manual is 1.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info