719018

Springlane 943766 - Mila Manual

26
Zoom out
Zoom in
Previous page
1/92
Next page
26
lid and plug in a dishwasher, to avoid
damaging the seals.
4. Also regularly clean the metal pins pro-
truding into the mixing chamber, the
silicone valve through which the water
flows into the mixing chamber, as well
as the silicone spout with a damp cloth.
5. Regularly clean the water container to
make sure it always stays hygienically
clean.
6. Clean the housing with a damp and soft
cloth and thoroughly dry afterwards.
WARNING: If you wish to
clean the blades by hand,
switch off the device and remove
the mains plug. Please pay attenti-
on and be careful, the blades are
very sharp.
Do not disconnect the
power supply of the appli-
ance during the cleaning program-
me and do not interrupt the
programme.
REMOVE RESIDUES FROM
THE MIXING CHAMBER
Please follow these steps if you wish to
remove any residues or unfinished milk
left in the mixing chamber due to a power
outage or for a different reason:
1. Connect Mila to the power supply.
2. As soon as the display shows all sym-
bols, you can have the rests fed out by
holding the "Capacity" button.
3. Afterwards, start a manual cleaning
programme using the “Cleaning”
button.
DESCALING
Treat Mila with care and only use filtered
water. You should additionally descale
Mila regularly. We recommend descaling
after every 50th preparation process, or
whenever you clearly notice limescale on
or in the machine. To descale, proceed as
follows:
1. Add 3 tsp baking soda into the water
container and fill it with water.
2. Run through a preparation programme
without any ingredients using a quantity
of 300 ml.
3. Abort the preparation by removing the
water container. Drain the remaining
water with baking soda. Wait for 1 hour
and reinsert the water container with
fresh water. Now, allow the programme
to finish.
4. Afterwards, run through two preparation
programmes without any ingredients
using a quantity of 1,000 ml each time.
Repeat the process, if required. Now,
Mila is good to go.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Springlane 943766 - Mila at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Springlane 943766 - Mila in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info