719483
20
Zoom out
Zoom in
Previous page
1/56
Next page
20
ICE CREAM REMOVAL
1. Ice cream is ready when the display
shows "00:00". Before removing the
product, switch the appliance off using
the POWER button and unplug it
from the socket.
2. Remove the transparent lid.
3. Take the container out of the appli-
ance and carefully pull the mixing
paddle out of the ice. If the ice cream
container is frozen slightly and cannot
easily be lifted out of the recess in the
housing, wait for a few minutes and try
removing it again.
4. Fill ice cream into suitable containers.
Refrain from using sharp or pointed
objects, but rather use a plastic or
wooden spoon, to avoid damaging the
ice cream container. We recommend
silicone dough scrapers.
5. If you are finished making ice cream,
switch off the appliance with the
START/STOP button and disconnect
the plug.
COOLING FUNCTION
To keep the ice cream from melting, the
cooling function automatically switches
on: If the ice cream is not taken out within
10 minutes after preparation time is up
and no other button is pressed, the ice
cream maker will automatically go into
cooling mode every ten minutes for 1
hour. Afterwards, the ice cream maker
goes into standby mode.
MOTOR PROTECTION FUNC
TION
If the ice cream mass becomes harder,
the motor can get jammed. The motor
protection function makes sure that the
mixing motor automatically stops at a
hard ice cream consistency to avoid motor
damage.
TIPPS FOR PERFECT ICE
CREAM
Self-made ice cream tastes best when
fresh. It does not contain any preser-
vatives and should therefore be eaten
immediately, if possible.
Always use very fresh eggs for your ice
cream.
Always use fully ripe fruits for fruit ice
cream and only add them at the end
of the preparation time through the
opening in the lid.
Instead of sugar, you can also use
honey or syrup as sweeteners.
You can substitute cream and milk
for each other as you wish. The more
cream you add, the creamier the ice
cream will be.
The colder the ice cream mass is befo-
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Springlane 190028 - Emma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Springlane 190028 - Emma in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info