695081
9
Zoom out
Zoom in
Previous page
1/12
Next page
8
OPERATION PROCE DURE:
1. Installs 2 pieces of 1.5V #3 batteries, then the screen will display as following “Drawing A” and
have “Bi” sound at the same time, then enter to the personal data setting and press “MODE”
button for confirmation. After that, it goes to the next step to the main menu as “Drawing B”.
2. Get access to the set-up mode of TIME/DISTANCE/CALORIES/PULSE. When you are in each
set- up mode, for example in the time set-up mode, time value is blinking, you can use jogg
le
wheel to adjust the value and press “MODE” for confirmation. The set-up of DISTANCE,
CALORIES & PULSE is the same.
3. With any signal been transmitted into the monitor, the value of TIME, DISTANCE, CALORIES
start to count up as Drawing C. When there is any function has been preset the target (TIME or
DISTANCE or CALORIES), the function will be counting down from the preset to zero while the
training starts. Once the target is achieved to zero, the monitor start to beep for 8 seco
nds, and
the function will be counting up from zero directly if the training is going. Press “MODE” button for
confirmation and skip to next set-up.
4. In SCAN mode shown as “Drawing C”. RPM/SPEED/TM/DIST/CAL/PULSE will skip to display in
every 6 seconds. The order is as follows.
5. You can also press “MODE” button to select single function display except RPM & SPEED
function. The RPM & SPEED function will switch display.
6. RECOVERY
(1) When the user presses “RECOVERY” butto
n, the RECOVERY function is active. At this time
only PULSE and TIME is working, other functions will not be displayed, and the Sensor Input is
not available. TIME starts to count down from ”060”, Pulse signal will be blinking according
user’s heart rate BPM. When Time counts down to “0”, it will show F1~F6 (F1 is the best, F6 is
the worst).
(2) LCD display as follows: (RECOVERY start condition & end condition).
(3) If the count down action to 0:00 is not completed and there is no pulse signal, the count down
action has to be done and shown F6.
(4) If you press the RECOVERY button prior to count down to 0:00, it will be end and
return to the
main menu.
Drawing A Drawing B
Drawing C
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sporttronic ST-X6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sporttronic ST-X6 in the language / languages: English as an attachment in your email.

The manual is 11,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sporttronic ST-X6

Sporttronic ST-X6 User Manual - German - 11 pages

Sporttronic ST-X6 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info