Manual Sportstech WBX320 (page 29 of 88) (English, German, Dutch, French, Italian, Spanish)

736464

Zoom out

Zoom in

1/88

Air loss:

If your board seems a bit soft, there is not necessarily a leak. The ambient temperature inﬂuences the

internal pressure of the chamber: A deviation of 1 ° C results in a pressure deviation in the chamber of

+/- 4 mbar (.06 psi). If the board was inﬂated late in the evening, it could cause the air to cool over-

night. The cooler air leads to less pressure, so it can be less inﬂated the next morning. If there is no

temperature deviation, you must ﬁrst ﬁnd out where the air escapes.

Please note the following procedure:

1.Check whether there is sand or dirt in the valve.

2. Make sure the valve seal is properly positioned.

3. Rinse the SUP board surface and also the valve surround with soapy water.

4.When bubbles form, there is a leak and needs to be repaired.

Small repairs: First let the air out. Thoroughly clean the board (vinyl cleaner can be used for this

purpose) and dry the area to be repaired. For a smaller hole, apply a small drop of glue (not included).

Let the glue dry for 12 hours. (For minor repairs, use a soft plastic adhesive that is waterproof and heat

resistant).

Please note: For the repairs, the air must be drained and the board must lie ﬂat.

1. Thoroughly clean the area surrounding the leak. Remove any dirt.

2. Cut a piece from the original patch. The piece should be large enough sothat the damaged area is

overlapped by about 1.5 cm. Use a ballpoint pen to set the size of the patch. Round off the corners.

3. Apply a thin layer of adhesive (not included) to the bottom of the patch and to the area to be repai-

red. Allow the glue to dry for 2 - 4 minutes until it appears milky.

4. Place the patch on the damaged area and press ﬁrmly. Please do not use the board for the next 24

hours to allow the adhesive to take maximum effect.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sportstech WBX320 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sportstech WBX320 Manual

Product: