736452
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
Lubrication
After running for a period of time, the treadmill must be configured with special cymene silicone oil
for lubrication.
Suggestion:
Do not lubricate more than what you need to. Remember: regular and
reasonable lubrication is to improve the lifespan of your treadmill.
Lubrication method
If its neccessary to lubricate the treatmill (Please pay attention to the intervals) do it like this:
1. Please loosen the walking bolt, you can archive this in turning the screws at the end of the
treatmill.
2. If the walking beld is loosen you kan pull it up at one side and put a stripe of oil
3. on the frame, do the same at the other side.
4. Now tighten the belt again and activate the treatmill in the lowest possible speed for 5 minutes.
After this you can use the treatmill again.
Running belt tension adjustment
You may need to adjust the treadmill according to your personal needs. But after running for a period
of time, due to personal weight, the belt tension may change from default setup. If you realize that
the belt is slippery that may be caused by loose tension, then you need to adjust the running belt
and roller. Please do not adjust too tight that may bring too much pressure on the motor which would
damage the motor, running belt and roller.
Running belt far to the right side adjustment
At the operating state, pressing the “+” and “ - ” or the rise “SHORTCUT” key can adjust the grade of
the treadmill.
Main frame is not being placed on a flat surface.
Users are not running in the middle of the belt.
Forced deviation.
After a few minutes no-load rotation, the deviation can not be automatically restored. If not
recovered,you may adjust it with the 6mm hex key in the Tool Kit, turn it clockwise for 90 degrees.
If deviate to the left, then adjust the screw on the left side clockwise or the screw on the right side
anticlockwise. If deviate to the right, then adjust the screw on the right side clockwise.
MAINTENANCE
Downloaded from www.Manualslib.com manuals search engine
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sportstech F65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sportstech F65 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info