Manual Sportstech ES400 (page 34 of 112) (English, German, French, Italian, Spanish)

736454

Zoom out

Zoom in

1/112

ATTACH THE FRONT POST

• Remove the pre-assembled 4 Allen head bolts (38) and 2 plastic washer (37) ,2

curve washers (11) and 4 flat washer (12) 2 spring washer (12) from the main

frame (26).

• Connect the middle section sensor wire (44) of the front post (45) with the lower

section sensor wire (41) securely.

• Connect the tension cable (40) with lower tension cable (43). (See figure).

• Put the front post (45) and front cover (42) into the bottom post of main frame (26)

and fasten with 4 Allen head bolts (38) and 4 plastic washer (37), 4 curve washers

(11), 4 spring washer (12). Please note don‘t tighten all head bolts (38) too much

at the beginning. When all parts are fixed already, and then fasten each one piece

tightly.

• Assemble bottle holder (45) with 2 screw (6).

• Assemble each pedal (1R&1L) to the crank . Pedal ”R” assemble with crank right

side, Pedal ”L” assemble with crank left side: See the mark „R“ & „L“ (right and left)

on the pedals (11R&11L) and crank.

Step 3

NOTE: The right pedal „R“ should be threaded on clockwise. The left pedal „L“

should be threaded on counter-clockwise.

• Attach the pedal straps to the pedals (1R&1L).

NOTE: Adjust the pedal straps to meet your foot/shoes size by 4 adjustable holes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sportstech ES400 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sportstech ES400 Manual

Product: