575565
10
Zoom out
Zoom in
Previous page
1/28
Next page
At the same time, the Impeller Assembly will also disengage
from the short Connector Tube and the Upper Cap.
To replace the Impeller Assembly with Tubing, simply reverse
this process. Make sure that both of the rails are aligned
properly so that the Impeller Assembly’s locking tabs engage
the notches in the Upper Cap. Gently push the Impeller
Assembly up and into the short Connector Tube and the
Upper Cap making sure that the barbed fi tting is securely
inserted within. At this point, you should hear an audible
“click” indicating that the Impeller Assembly with Tubing
is properly attached to the Upper Cap.
IMPELLER ASSEMBLY AND TUBING
Both the Short Connector Tube and the Longer Draw
Tube that attach to either end of the Impeller Housing may
be removed and then reattached by simply pulling them
off and pushing them back on to the barbed fi ttings.
Note: The Impeller Housing and Tubes can only fi t together
in one orientation or the system will not work. Please make
sure that the Short Connector Tube is at the top of the
Impeller Housing (defi ned by the check valve inside) and the
Longer Draw Tube is at the bottom.
MOUTHPIECE AND UPPER CAP ASSEMBLY
To remove the Mouthpiece, grasp it fi rmly and
pull until it comes free of the Upper Cap.
To replace the Mouthpiece, simply press it over
and down on to the stem of the Upper Cap until
it is properly seated.
BEZEL WITH COMPUTER AND BPA-FREE BOTTLE
With the Upper Cap removed from the Bottle,
the Bezel with attached Computer may be lifted up
and off the Bottle as a single piece. To replace,
simply reverse the process and press the Bezel with
Computer back down and onto the Bottle.
10
SP3906IS0ISPORE.indd 103906IS0ISPORE.indd 10 10/20/08 4:38:02 PM10/20/08 4:38:02 P
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sportline Hydra Coach at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sportline Hydra Coach in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info