575648
6
Zoom out
Zoom in
Previous page
1/17
Next page
7 8
ACQUIRING HEART RATE (WEARING THE CHEST BELT)
ACQUIRING HEART RATE: FINGER TOUCH
Heart rate may be acquired from any operating mode (not in any Setting Sequence).
1. With the watch attached to your wrist, TOUCH & HOLD the HEART RATE SENSOR (anywhere on the
metal top plate) with one finger.
NOTE: If Heart Rate Sensor is accidentally touched, the watch will automatically attempt to acquire heart rate. If no
heart rate is detected, watch will resume operating mode in approximately 10 seconds. This will not interfere with any
timing functions in progress.
NOTE: You may exit Heart Rate mode at any time by Pressing the Mode, Start/Stop or Reset key.
2. Continue TOUCHING & HOLDING until heart rate displays.
3. Once Heart Rate is acquired, RELEASE THE SENSORS. Heart Rate will continue to display for a
period of approximately 10 seconds.
4. If trouble acquiring heart rate, moisten the underside of the watch case (so contact between the
wrist and watch is ensured). To activate heart rate, the watch’s back plate must come into direct
contact with your skin, while your fingertip is touching the top case.
See p.26 for more troubleshooting details.
ACQUIRING HEART RATE: WEARING THE CHEST STRAP TRANSMITTER
The Chest Strap Transmitter provides constant heart rate information throughout the duration of your
workout. To ensure a proper heart rate display, the chest transmitter must be properly adjusted. Snap
the plastic tabs at the end of the elastic belt into the holes at the end of the transmitter and adjust the
strap so that the transmitter fits tightly below the pectoral muscles, as shown in the drawing.
NOTE: Users with significant chest hair may have a problem obtaining contact between the transmitter electrodes and
their skin, resulting in poor performance. It may be necessary for these individuals to shave the area of their chest
beneath the transmitter.
NOTE: In dry and cold climates it may take a few minutes for a layer of perspiration to form between the chest strap
and the skin. Moistening the electrodes with saliva or ECG conductive gel can speed up this process.
ACQUIRING HEART RATE
ELECTRODES
NOTE: DEACTIVATING TOUCH HEART RATE
If you wish to deactivate the touch heart rate feature, in Time mode, PRESS
& HOLD the RESET/LOCK button for 3 seconds. A lock icon will appear on the
screen indicating the feature is deactivated. Hold the button again for 3 seconds
to activate the feature.
NOTE: DISPLAYING HR ON THE WATCH
Once the chest strap is correctly in place, you must toggle the watch
display to the HEART RATE/CHRNOGRAPH mode and PRESS the
START/STOP button. The timer will begin running, and the watch
will begin displaying heart rate from the strap after a slight delay.
See p.18 for more details.
SB1970IS01SPO.indd 7-8SB1970IS01SPO.indd 7-8 8/6/12 11:08 AM8/6/12 11:08 AM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sportline 560 DUO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sportline 560 DUO in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info