78810
10
Zoom out
Zoom in
Previous page
1/76
Next page
Noise
Vibration
Declaration
of conformity
Measured values determined according to EN 60745. Typically the A-
weighted noise levels of the tool are:
Sound pressure level chisel: 1(97 + 3) dB(A) drill: 1(95 + 3) dB(A)
Sound intensity level chisel: (108 + 3) dB(A) drill: (106 + 3) dB(A)
Wear ear protection!
The typical weighted acceleration is 18,8 m/s
2
(chisel) 18,7 m/s
2
(drill).
The vibration emission level given in this information sheet has been meas-
ured in accordance with a standardised test given in EN 60745 and may
be used to compare one tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but
not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
We declare under our sole responsibility that this product is in conformity
with the following standards or standardized documents:
IEC 60745-1, IEC 60745-2-6, EN 60745-1, EN60745-2-6, EN 55014, EN
61000-3, in accordance with the regulations 2006/42/EC, 2004/108/EC
Didier BOURRETTE Jens STELLWAG
Technical file at: Jens Stellwag
SPIT S.A., Route de Lyon - B.P. 104, F-26501 Bourg-les-Valence
8
Technical information
Characteristics
Tool fixing ……………………………………………………… S2S max
Voltage ……………………………………………110 V …………230 V
Frequency ………………………………………………………50-60 Hz
Amperage ………………………………………10.8 A …………5.7 A
Power input………………………………………………………1250 W
Rotation speed ………………………………………………0 - 260 min
1
Hammer rate strokes ……………………………………0 - 2700 min
-1
Impact energy ………………………………………………………10 J
Weight………………………………………………………………7.9 kg
Cable length …………………………………………………………4 m
Carbons ………………………………………………self-disconnecting
Lubrication …………………………………………………oil lubrication
Angle of chisel ………………………………………………8 positions
Switch ……………………………………………with electronic control
Class II …………………………………………………………………
Min. distance from the wall in order to drill ……………………39 mm
Dimensions (mm)………………………………………480 x 280 x 120
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spit 372 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spit 372 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info