584063
10
Zoom out
Zoom in
Previous page
1/24
Next page
Z100. / Z500 / Z900
9
ASSEMBLY PACK CHECK LIST (Z900)
(3 pcs) M3 x 18 m/m Phillips Head Screw
(10 pcs) 5/16 x 1/2 Button Head Socket Screw
(4 pcs) 5/16 x 3/4 Button Head Socket Screw
(2 pcs) M5 Iron Plate Nut
(2 pcs) 3/8 x 2T Spring Washer
(2 pcs) 5 x 16 m/m Tapping Screw
(4 pcs) 5 x 16 m/m Tapping Screw
(1 pc) Safety Key
(1 pc) Belt / Deck Lubricant
(1 pc) Combination M5 Allen Wrench & Phillips Head Screwdriver
(1 pc) M6 Allen Wrench
Assembly ( Z900 )
STEP 1
Remove all parts from the carton.
STEP 2
Connect Computer Cable (Lower) with Computer Cable (Middle).
STEP 3
Hand tighten Right and Left Uprights into Main Frame with 2pcs of 3/8 x 2 Button Head Socket
Screws), 2pcs of 3/8 x 2T Spring Washers and 6pcs of 5/16 x 1/2 Button Head Socket Screws by
using the Combination M5 Allen Wrench & Phillips Head Screwdriver and M6 Allen Wrench.
STEP 4
Install the Upright Support onto the Left and Right Uprights with 4pcs of 5/16 x 3/4 Button Head Socket
Screws, by using the Combination M5 Allen Wrench & Phillips Head Screwdriver.
*Please don’t tighten them, yet.
STEP 5
Connect Computer Cable (Middle) with Computer cable (Upper).
Connect Speed Adjustment Switch W/Cable with Speed Cable (Upper).
And connect Incline Adjustment Switch W/Cable with Incline Cable (Upper).
STEP 6
Install the Console Support into the Right and Left Uprights with 4pcs of 5/16 x 1/2 Button Hand Socket
Screws, by using the Combination M5 Allen Wrench & Phillips Head Screwdriver. Then Install the
Beverage Holder onto the Console Support. * Tighten all screws installed in STEP 4.
STEP 7
Install the 2pcs of Iron Plate Nuts into side of the Top Motor Cover.
STEP 8
Install Frame Base Cap (R) and Frame Base Cap (L) with 2pcs of 5 x 16 m/m Tapping Screws and 4pcs
of 5 x 16 m/m Tapping Screws by using the Combination M5 Allen Wrench & Phillips Head
Screwdriver.
STEP 9
Connect the Computer Cable of Fan Assembly with Console.
Install the Fan Assembly onto Console with 3pcs of M3 x 18 m/m Phillips Head Screws by using the
Combination M5 Allen Wrench & Phillips Head Screwdriver.
PLEASE LOCK DOWN ALL HARDWARE AFTER THE ACCESSSORIES HAVE BEEN
ASSEMBLED.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit Z100 2006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit Z100 2006 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info