584057
22
Zoom out
Zoom in
Previous page
1/33
Next page
XT375 / XT475 / XT675
21
Auto-Pilot feature
This unique feature allows the user to instantly enter the Heart Rate Control mode at any time
with the press of a button.
The HR2 program button also doubles as the Auto-Pilot button. During any program the user
may press the Auto-Pilot button to enter the HRC program. Your current heart rate (the heart
rate you are at when you press Auto-Pilot) will be maintained automatically by the Auto-Pilot
program. You may press the elevation/incline up or down buttons to change your target heart
rate while in the Auto-Pilot mode.
Speakers:
The console has built-in Speakers. You may Plug an Audio Source (CD player, MP3,
Computer, etc.) into the Jack on the Left side of console. There is no volume control on the
console. The volume must be controlled on the Audio Source.
Handrail buttons disable switch
Just above the Stop button there is a button with a picture of the handrail switches on it and
an indicator light above it labeled Disabled. When the indicator light is lit, the handrail
switches are disabled. This allows you to use the full length of the handrails without fear of
activating the speed or elevation controls.
To Turn Treadmill Off:
(1) Display will automatically turn off (go to sleep) after 30 minutes (no key operations). The
treadmill will draw very little current in sleep mode (about as much as your television when it
is turned off).
(2) Remove tether cord.
(3) Turn of the main switch on the front of the treadmill, below the motor cover.
The XT Series offers seven factory preset-programs, two user defined programs and one
Manual program. Each preset program has a maximum speed level that is displayed when a
desired workout is chosen. The maximum speed that the particular program will achieve will
be displayed in the Speed window.
Also included are two user programs (User 1 and User 2) for custom workouts.
To Select a Program:
STEP 1: Press the desired PROGRAM key. Press enter to select the program. The display
will prompt you through the programming or you can just press Start to begin the program
with default values.
STEP 2: If enter was pressed, the Time window will blink with the default value of 20 minutes.
You may use any of the up/down keys to adjust the time. After adjusting, or to accept the
default, press enter. (Note: You may press start at any time during the programming to start
Programmable Features
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XT475 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XT475 2007 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info