518624
19
Zoom out
Zoom in
Previous page
1/32
Next page
15
Treadmill
XT285
STEP 1: Press the desired program (Hill, Fat Burn, Cardio, Strength, or
Interval) key. Press Enter to select the program. The display will prompt you
through the programming or you can just press Start to begin the program
with default values.
STEP 2: If Enter was pressed, the Message Center will now be blinking a value,
indicating your Age (default is 35). Entering your correct age affects the heart
rate Bar Graph Display and the Heart Rate programs. Use the + / - keys to
adjust, then press Enter. Your age determines your recommended maximum
heart rate. Since the Bar Graph Display and the Heart Rate features are based
on a percentage of your maximum heart rate, it is important to enter the
correct age for these features to work properly.
STEP 3: The Message Center will now be blinking a value, indicating your Body
Weight (default is 150 lbs.). Entering the correct body weight will affect the
calorie count. Use the + / - keys to adjust, then press Enter. A note about the
Calorie display: No exercise machine can give you an exact calorie count
because there are too many factors which determine exact calorie burn for a
particular person. Even if someone is the exact same body weight, age and
height, their calorie burn may be very different than yours. The Calorie display
is to be used as a reference only to monitor improvement from workout to
workout.
STEP 4: The Message Center will be blinking a value, indicating Time (the default
value is 30 minutes). You may use any of the + / - keys to adjust the time. After
adjusting, or to accept the default, press Enter. (Note: You may press Start at
any time during the programming to start the program).
STEP 5: The Message Center will now be blinking the preset top speed of the
selected program (3 mph or 5 kph). Use the Speed + / - keys to adjust, then
press Enter. Each program has various speed changes throughout; this allows
you to limit the highest speed the program can reach.
STEP 6: The Message Center will be blinking the preset top incline of the selected program (6.0%). Use
the Incline + / - keys to adjust, then press Enter.
You are now done programming data and may press Start to begin your workout or Enter to go back
one level to change data entered in the programming phase.
To Select and Start A Preset Program
Programmable Features
The
XT285
offers seven factory preset-programs and one Manual program. Each preset
program has a maximum Speed and Incline level that is displayed when a desired workout is
chosen. The maximum Speed and Incline that the particular program will achieve will be displayed
in the Message Center.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XT-285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XT-285 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Spirit XT-285

Spirit XT-285 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info